155 mm Long Tom

M1 155 mm Long Tom
Long Tom in travelling position, US Army Ordnance Museum.
Type	Towed field artillery
Place of origin	United States
Service history
Used by	United States Italy Australia Austria Japan Jordan South Korea Republic of China Turkey Pakistan Croatia South Africa United Kingdom
Wars	World War II, Korean war, Croatian War of Independence
Production history
Designed	1930s
Specifications
Weight	Travel: 13,880 kg (30,600 lb)
Barrel length	6.97 m (22 ft 10 in) L/45
Crew	14
Caliber	155 mm (6.10 in)
Breech	Asbury mechanism
Carriage	M1 Carriage
Elevation	−2°/+65°
Traverse	60°
Rate of fire	40 rounds per hour
Muzzle velocity	853 m/s (2,799 ft/s)
Maximum firing range	23.7 km (14.7 mi)

The 155 mm Long Tom was a 155 millimeter caliber field gun developed and used by the United States mililtary. It was produced in M1 and M2 variants (later known as the M59). Developed to replace the Canon de 155mm GPF, the gun was deployed as a heavy field weapon during World War II and the Korean War, and also classed as secondary armament for seacoast defense. The gun could fire a 45.36 kg (100 lb) shell to a maximum range of 22 km (13.7 mi), with an estimated accuracy life of 1,500 rounds.

The Long Tom was also adopted by a number of other nations, including the United Kingdom, Austria, Israel, and the Netherlands.

Before entering World War I, the United States was poorly equipped with heavy artillery. To address this problem a number of foreign heavy artillery guns were adopted, including the Canon de 155 mm GPF. After the end of the war the Westervelt Board was convened to assess the artillery experience of the combatant powers and map out future directions for the US Army artillery. The conclusion of the board vis-a-vis heavy field artillery was that the French 155mm GPF should be adopted as the standard heavy field piece but further development work should occur to achieve a heavy field gun with a max. range of 25,000 yards, a vertical arc of fire from 0° to 65°, a projectile not exceeding 100 lbs and the capability to be mounted on a caterpillar mount or a rubber tired towed mounting. A number of prototypes were produced in the 1920s and 1930s, but the projects were put on hold due to lack of funds. In 1938 the 155 mm Gun T4 on Carriage T2 was finally adopted as 155 mm gun M1 on Carriage M1.

The new gun design used a barrel similar to the earlier 155 mm GPF, but with an Asbury mechanism that incorporated a vertically-hinged breech plug support. This type of breech used an interrupted-thread breech plug with a lock that opened and closed the breech by moving a single lever. The ammunition for the 155 mm gun was "separate-loading", that is with the shell and the powder charge are packaged, shipped and stored separately. The shell is lifted into position behind the breach and then rammed into the chamber to engage the shell's rotating band into the barrel rifling.

Ramming the shell home is followed by loading a number of powder bags, as required for the desired range. The powder charge could be loaded in up to seven charge settings. Once the powder is loaded, the breech plug is closed and locked, and a primer is placed in the breech plug's firing mechanism. After setting the elevation and azimuth, the gun is ready to fire. The firing mechanism is a device for initiating the ammunition primer. The primer then sets off the igniter which ignites the propelling charge of the ammunition. A continuous-pull lanyard first cocks the firing pin, then fires the primer when pulled.