Type 90 75 mm Field Gun

Type 90 75 mm field gun
Type 90 75 mm field gun at the U.S. Army Field Artillery Museum, Ft. Sill, OK
Type	Field gun
Place of origin	Empire of Japan
Service history
In service	1932-1945
Used by	Imperial Japanese Army
Wars	Second Sino-Japanese War Soviet-Japanese Border Wars World War II
Production history
Produced	1932-1945
No. built	786
Specifications
Weight	1,400 kg (3,086 lb) (firing) 2,000 kg (4,409 lb) (travel)
Length	5.23 m (17 ft 2 in) (firing) 3.8712 m (12 ft 8.41 in) (traveling)
Barrel length	2.883 metres (9 ft 6 in) L/38.4
Width	1.50 m (4 ft 11 in) Track 1.75 m (5 ft 9 in) Maximum
Height	1.65 m (5 ft 5 in)
Shell	75 x 424mm R
Shell weight	6.56 kilograms (14.5 lb)
Caliber	75 mm (2.95 in)
Action	Manual
Breech	horizontal sliding block
Recoil	hydro-pneumatic
Carriage	split trail
Elevation	-8° to +43°
Traverse	25° left, 25° right
Rate of fire	2 minutes 15 rpm, 15 minutes 4 rpm Continuous 100-120 rph
Muzzle velocity	683 m/s (2,241 ft/s)
Maximum firing range	14,960 metres (16,360 yd)
Sights	panoramic

The Type 90 75 mm field gun (九〇式野砲, Kyūmaru-shiki yahō) was a field gun used by the Imperial Japanese Army during the Second Sino-Japanese War, Soviet-Japanese Border Wars and World War II. The Type 90 designation was given to this gun as it was accepted in the year 2590 of the Japanese calendar (1930). It was intended to replace the Type 38 75 mm field gun in front line combat units, but due to operational and budgetary constraints, the Type 38 continued to be used.

Prior to World War I, the Imperial Japanese Army was largely equipped with Krupp cannons from Germany. After the Versailles Treaty, the Japanese switched to the French Schneider company, and purchased numerous examples for test and evaluation. With an army rearmament program starting in 1931, a new 75 mm field gun loosely based on the French Schneider et Cie Canon de 85 mle 1927 built for Greece was introduced, and labeled the "Type 90".

However, few units were built, and the design never achieved its intended purpose of replacing the Type 38 75 mm field gun. The Schneider design was very complex and expensive to build, requiring very tight dimensional tolerances that were beyond the limits of Japanese industry at the time. In particular, the recoil system required a high amount of complex maintenance, which was difficult to sustain in front line combat service.

The Type 90 75 mm field gun was unique among Japanese artillery pieces in that it had a muzzle brake. The carriage was of the split trail type. The Type 90 was built in two version: one with wooden wheels suitable for animal (horse) draft, and another with solid rubber tires and a stronger suspension for towing by motor vehicles. The latter weighed 200 kilograms (440 lb) more.